• Working Height
• 5 ft (12.19 m)
• Horizontal Reach
• 5 ft (8.84 m)
• Platform Capacity
• 350 lbs. (158.7 kg)
• Material Handling
• No
• Insulation
• No
• Availability
• Available subject to prior sale
• Sales Representative
• Dar heavy equipment
• Retail Price
• Please Contact Us

CABLE PLACER

Working Height: 40.5 ft (12.19 m)

Horizontal Reach: 26.5 ft (8.84 m)

Platform Capacity: 350 lbs. (158.7 kg)

RTG 11265 STP-36-NE

• Designed and certified for towering
• Single stick, two speed platform control
• Ease of Maintenance: Non-lube bearings, open center system

A RELIABLE LIGHT-DUTY CABLE PLACER

(Images and specs shown for reference)

______________________________________________________

INDUSTRIES SERVED

Telecommunications

TYPE

Cable Placer

MODEL SERIES

STP

Download Spec Sheet

PRODUCT OVERVIEW

Working Height

40.5 ft (12.19 m)

Horizontal Reach

26.5 ft (8.84 m)

Platform Capacity

350 lbs. (158.7 kg)

Material Handling

No

Insulation

No

Availability

Available subject to prior sale

Sales Representative

• Dar heavy equipment

Retail Price

Please Contact Us

DESCRIPTION

Bucket Truck for Sale – VERSALIFT STP-36-NE a non-insulated, end mounted 35 ft.6 in.

(10.8 m) telescopic articulating aerial platform lift, 40 ft.

6 in. (12.3 m) working height including the following standard and optional features:

• Max combined capacity platform load plus cable down load is 350 lbs. (158.7 kg).
• Max cable download is 50 lbs.
• Upper controls consist of a single stick, toggle switches and emergency stop.
• Heavy duty intercom system for communication between cab and platform.
• Engine start/stop system with controls at platform and remote handheld lower controls.
• 370° non-continuous rotation with a mechanical stop.
• Open center hydraulic system operates at 1.5 to 2 GPM (6-8 LPM) at 2000 psi (140 kg/cmۜ)
• External hydraulic oil reservoir with 6 gal. (23 l) capacity.
• Outer boom consists of a 6 in. X 8 in. (150 mm x 200 mm) steel section
• 5 in. X 7 In. (130 mm x 180 mm) rectangular aluminum inner boom is housed within the outer boom.
• End mounted walk in 24 in. x 30 in. x 42 in. (0.61 m x 0.76 m x 1.07 m) fabricated steel tube platform includes hinged door with slam latch and safety chain.
• Master/slave hydraulic leveling with control to tilt for cleanout or rescue.
• Non‑lube bearings used at all pivot points.
• Multi‑link hose carrier system through booms.
• Rubberized boom cradle
• Backup pump providing power to all boom functions and emergency lowering.
• Mounting hardware for chassis/cab installation.
• Handheld remote lower control with series of spring loaded toggle switches and control selector switch
• GFCI receptacle for 120 volt power at platform
• Single pneumatic airline to platform.
• Full body harness and lanyard.
• Painted standard white urethane.
• Two operator’s manuals and two service manuals.
• ANSI A92.2 data plate.

DAKOTA SERVICE BODY 132” LONG X 40” HIGH X 94” WIDE:

• 12 gauge tread plate floor with 6” structural channel frame
• 40 in. compartment height, 20 in. compartment depth, 54 in. floor width.
• Stainless steel automotive rotary type door latches and chain stops on all doors
• Rubber rolled crown type fenders
• 30” tread plate tail shelf with 7-lamp light bar and two (2) oval cutouts for strobe lights
• Curbside single recessed step with belt step and grab handles
• Master door lock, hook and loop system on each door with two (2) spring loaded door handles (unlocked)
• Wheel chock holders curbside
• Removable composite tailgate installed at rear of load space.

CURB SIDE COMPARTMENTS AS FOLLOWS:

• 1^st Vertical: Two (2) adjustable shelves with adjustable dividers.
• 2^nd Vertical: Access steps to bed with cable access step and removable composite side gate.
• Horizontal: Open
• Rear Vertical: Five (5) fixed material hooks (1-3-1)

STREET SIDE COMPARTMENTS AS FOLLOWS:

• 1^st Vertical: Two (2) adjustable shelves with adjustable dividers.
• 2^nd Vertical: Two (2) adjustable shelves with adjustable dividers.
• Horizontal: One (1) adjustable shelf with dividers.
• Rear Vertical: Five (5) fixed material hooks (1-3-1)

CAB AND CHASSIS TO THE FOLLOWING SPECIFICATIONS:

• 2019 Ford F-550 4×2 cab and chassis.
• GVWR 19,500 lb. payload plus upgrade package.
• 84” cab to axle.
• 8L 3-valve SOHC EFI V10 gasoline engine
• TorqShift 6-speed automatic transmission includes SelectShift.
• 88 limited slip axle.
• Air conditioning.
• 225/70R19.5G BSW AS tires.
• Snow plow prep package.
• Aft-Axle frame extension pack.
• Trailer brake controller (TBC)
• Rear view camera and prep kit
• AM/FM radio.
• Painted Oxford White.

INSTALLATION TO INCLUDE THE FOLLOWING:

• Install VERSALIFT STP-36-NE, mounting hardware, PTO and pump.
• Install rear torsion bar and ballast.
• Install and paint Dakota service body and accessories.
• Install ladder rack with hold down and locking feature.
• Install two (2) knuckle mounted amber strobe lights
• Install two (2) amber strobe lights in tail shelf and two (2) strobes lights in front grill
• Install Dimensions Pure Sine inverter with battery and box.
• Install combination pintle hitch with 2” ball, D rings and 7 prong trailer connector
• Install mud flaps and back up alarm
• Furnish fire extinguisher, 3 piece triangle reflector kit and pair of rubber wheel chocks.
• Test ride completed unit for 1 hour.
• Test and certify per ANSI A92.2.